KitchenAid Mixer Speed Lock Lever Knob Repair Kit LG 3/16 Black PETG

3D Printed Speed and Lock Lever Knobs for KitchenAid Stand Mixers — , LG 3/16" Lever

Two knobs, black PETG. For the large lever size — about 3/16" (4.76 mm) wide at the tip. Measure before ordering.

Part Details

• Material: PETG — chosen for its impact resistance and thermal stability over standard PLA, which softens and goes brittle over a mixer's service life
• Quantity: 2 knobs — speed lever and lock lever
• Color: Black
• Lever socket: 3.00 × 5.00 mm at the mouth, tapering to 2.44 × 4.44 mm at 16 mm depth
• Fits levers: approximately 3/16" (4.76 mm) wide at the tip — the LG size
• Knob size: 15.6 × 18.0 mm, 17.0 mm tall
• Ships from: United States
• Brand: Unbranded aftermarket replacement

Why These Knobs Break

They are small plastic knobs pressed onto thin metal levers that get worked through their full travel every time the mixer runs. The plastic splits at the socket and the knob drops off, leaving a bare metal lever that still functions but is awkward and sharp to use. Nothing mechanical or electrical has failed at that point, which is why a is the whole repair.

Compatible Models

Fits KitchenAid stand mixers using the large lever size, approximately 3/16" (4.76 mm) wide at the tip. Fit is determined by the lever, not by the model name on the mixer, so the measurement above is a far more reliable guide than a model list. Two things this does not fit: mixers with the small 1/8" lever, and the Professional 600 bowl-lift, whose speed lever is about 3.98 mm wide and would sit loose in this socket.

KitchenAid is a registered trademark of Whirlpool Corporation. PartsFindr is not affiliated with, endorsed by, or sponsored by KitchenAid or Whirlpool. Original 3D model design by twhiting16, licensed under Creative Commons Attribution.